For the first time, you can use the TruTool PN 201 battery machine cordlessly to cut sheet thicknesses in mild steel up to 2 mm, even in the case of doubled sheets. The extraordinarily strong machine with a long tool is particularly well-suited to deep trapezoidal sheets of up to 162 mm. The tool can be rotated 360° on the spot. The cutting direction, punch, and die carrier can be changed quickly, without the need for tools. For example, with the 4 Ah rechargeable battery you can therefore cut up to 54 meters in mild steel and a sheet thickness of 1 mm. You can choose from various tool depths to broaden the areas of application.

  • Machine with long tool – Primarily for processing profile depths of up to 6.37 in. Also well-suited to C-L-U profiles.
  • Ideal for hard-to-reach places – You can adjust the working direction through 360° in steps of 45° easily, without the need for tools.
  • Minimizes setup times – The punch and die carrier can be changed quickly without tools.
  • The perfect combination – The rechargeable battery achieves a runtime that is up to 60% longer due to the Power-Head-Technology and brushless motor.

Specifications

Maximum sheet thicknesses
Maximum sheet thickness, steel up to 400 N/mm² 2 mm
Maximum sheet thickness, steel up to 600 N/mm² 1.5 mm
Maximum sheet thickness, steel up to 800 N/mm² 1 mm
Maximum sheet thickness, aluminum up to 250 N/mm² 3 mm
Radii
Smallest radius 50 mm
General
Working Speed 1.6 m/min
Idle run stroke rate 1200 1/min
Starting hole diameter 24 mm
Voltage 18 V
Weight
Weight (with 2 Ah rechargable battery) 2.2 kg
Weight (with 4 Ah rechargable battery) 2.5 kg