The 10.8 V battery machine, without chip clipper, is particularly well-suited to cutting tasks without chip clipping during the cutting process. For example if you are cutting straight sheets to length or for curved cutting. The 10.8 V battery provides an above-average runtime. The 2 Ah battery cuts around 70 meters in 400 N/mm2 mild steel at a sheet thickness of 0.31 inch. You can even double this service life with the 4 Ah battery.
- Machine without chip clipper – For applications where chip clipping is not necessary during the cutting process.
- Easy and safe operation – A soft grip ensures a secure hold and enables low-vibration operation.
- Ideal for trimming to length – Well-suited for straight, distortion-free cuts and C-L-U profiles.
Specifications
| Maximum sheet thicknesses | |
| Maximum sheet thickness, steel up to 400 N/mm² | 1.6 mm |
| Maximum sheet thickness, steel up to 600 N/mm² | 1.2 mm |
| Maximum sheet thickness, aluminum up to 250 N/mm² | 2 mm |
| Spiral duct steel 400 N/mm² | 4 x 0,63 mm |
| Radii | |
| Smallest radius | 90 mm |
| General | |
| Working Speed | 5 m/min – 9 m/min |
| Idle run stroke rate | 4300 RPM |
| Starting hole diameter | 15 mm |
| Voltage | 10.8 V |
