With its light weight of just 22 lbs., the TruTool N 700 can cut sheet thicknesses of 0.25 in. It cuts through doubled sheets as well as bends of up to 90° and is, therefore, perfect for dismantling work. The two handles can be quickly swapped, making it easy to perform work in a wide range of situations. The compact handle is ideal for restricted spaces and the bow-handle is well-suited to all work situations.
- Cutting directions – The machine can be turned through 360° in 4 steps of 90°.
- Rectangular punch with flexibility for profiles – Ideal for work in hard-to-reach areas, for cuts across edges and weld seams.
- Minimal force required – You work without feed force so the required force is reduced to a minimum.
- Surprisingly lightweight – Unbeatable weight-performance ratio of 22 lbs. against a sheet thickness of 0.25 in.
|Maximum sheet thicknesses|
|Maximum sheet thickness, steel up to 400 N/mm²||7 mm|
|Maximum sheet thickness, steel up to 600 N/mm²||5 mm|
|Maximum sheet thickness, steel up to 800 N/mm²||3.5 mm|
|Maximum sheet thickness, aluminum up to 250 N/mm²||10 mm|
|Smallest radius||140 mm|
|Working Speed||1.3 m/min|
|Stroke rate with nominal load||300 RPM|
|Starting hole diameter||50 mm|
|Nominal power consumption||1600 W|
|Weight without cable||8.3 kg|