With its short tool, the TruTool PN 200 is specifically designed for trapezoidal sheets up to a profile depth of 3.4 inches and C-L-U profiles. Its performance is powerful enough for up to 0.08 inches in mild steel and 0.04 inches in stainless steel and it even cuts doubled sheets. You can also rotate the tool through 360° on the spot. The cutting direction, punch, and die carrier can be changed quickly, without the need for tools. You can choose from various tool depths to broaden the areas of application.

  • Machine with short tool – For processing profile depths of up to 3.4 inches and C, L, and U profiles. It is also well-suited for corrugated sheet.
  • Ideal for hard-to-reach places – You can easily adjust the working direction through 360 degrees, in steps of 45 degrees, without tools.
  • Minimizes setup times – The punch and die carrier can be changed quickly without tools.
  • Unbeatably fast – Fast and powerful with 7 feet per minute in 57,000 mild steel.

Specifications

Maximum sheet thicknesses
Maximum sheet thickness, steel up to 400 N/mm² 2 mm
Maximum sheet thickness, steel up to 600 N/mm² 1.5 mm
Maximum sheet thickness, steel up to 800 N/mm² 1 mm
Maximum sheet thickness, aluminum up to 250 N/mm² 3 mm
Radii
Smallest radius 50 mm
General
Working Speed 2.1 m/min
Stroke rate with nominal load 1500 RPM
Starting hole diameter 24 mm
Nominal power consumption 550 W

Videos